[FIXED] A Complete Guide to Fixing the Boot Configuration Data File Is Missing Error. – About the “0xc000000f” Error

Looking for:

No PXE Boot from VM with EFI. Using Microsoft WDS – VMware Technology Network VMTN

Click here to Download

Still Need Help?


Boot bcd 0xc00000f windows 10 sccm free download


If your PC did not come with a Windows installation disc or if you no longer have your Windows setup media, you can use Easy Recovery Essentials for Windows instead. EasyRE will automatically find and fix many problems, and can also be used to solve this problem with the directions below.

The automated boot repair component of EasyRE will address all BCD-related issues, fixing the BCD or recreating it from scratch using the correct encoding and path for the partition that is refusing to load properly. Easy Recovery Essentials searches for errors and makes corrections to the selected Windows installation.

This includes a memory card reader too. On Windows Vista, Windows 7, Windows 8, and Windows 10 or 11, Startup Repair can be used to scan the system for damaged or missing system files to replace the BCD file if it is corrupt or missing. Startup Repair is an automated diagnosis and repair tool that is available from the Windows setup disc and can be used to find and repair some common problems.

More information about how Startup Repair operates and what it does can be found in our knowledgebase. The following steps will initiate Startup Repair from the Windows setup disc:.

Unable to boot into the Windows setup CD? Unplug all HDD data cables, and then plug them again. Make sure to write down all current BIOS settings that were previously selected, just in case it is required to switch back.

The exact instructions differ from one manufacturer to the other, but the options will resemble what is shown in the screenshots below. Notice the key guide in the top-right corner.

If the hard drive has its file integrity compromised, it is possible to use built-in Windows CHKDSK utility to scan the disk and fix the file system errors. Replace C: with the letter of the driver where Windows is installed. Read more at Windows Recovery Disks. Now this is the one i am looking for. The way of solving this problem is too much great and it worked well for me and i hope it worked for all the peoples. Beware if you have optane on a gigabyte board, there is no solution.

Reinstalling is mandatory. I dual boot win7 and 10, unplugging the drives is required when going between OSs. Otherwise win7 will see your win10 drive, but not the optane, and it will see an incomplete array and attempt to repair it, obliterating your install in the process. A bcd repair or manual reentry is impossible because the RAID is not visible to the system in recovery modes.

It sees 2 separate drives, one with your files and the seemingly empty but not really empty optane drive, where the meta is held. Are you saying that there is no way to fix this on the Intel Optane? We have to clean install Win 10 all over again? Absolute goddamn legends, saved me a week of rebuilding the system. Tried all the described scenarios to fix. Win Immensly helpful.

This article is fantastic. Thank you deeply to your whole team, Manny. Installing linux deleted the EFI files and could not have dualboot, I did as you said, and it works! I will echo the comments of several earlier commenters. My Windows 10 laptop was booting into a recovery page and none of the options that I tried could return me to normal Windows. After about 10 hours of visiting numerous websites and trying various hokey cokey programs that claimed to detect and fix problems.

I found this page. With its clear explanations and step by step procedure for fixing the issue it solved my problem. I thought several times that I would end up formatting my hard drive and reinstalling Windows. As it is, everything appears to be completely back to normal. My last post was in April when this forum saved my bacon after I accidentally formatted the system partition.

It never occurred to me that what I did then was related to an ongoing problem of not being able to update from Windows 10 version no matter what I tried. Many of you will have already figured this out but for those having problems with Windows update this may be of some help.

It started recently when once again I wanted to update my desktop PC to the same Windows version as my laptop which never had problems with updating. Other ways to interrupt the boot process did not work, it just went to BIOS setup.

Google searches showed many suggestions for getting into Safe Mode but to no avail, but clues were there to suspect it had something to do with the boot partition. This resulted in — The boot configuration data store could not be opened. The requested system device cannot be found. Some days later, after first using Macrium Reflect to do a backup image of the Windows partitions, I tried doing a Windows Update. When I try to boot into windows 10 I just get a black screen with a flashing cursor.

When I hook this drive as a slave in another win 10 machine it shows in disk manager as follows: partition 1- MB EFI partition, , 2- windows data partition, 3- MB recovery partition, 4- You saved my Windows 7 installation with all the small little settings and apps I have inside. I have a GPT record so I used the approach like you suggested, with copying and it worked. Saved me a lot of time. Absolutely has saved my pc in multiple situations.

Very greatly appreciated. Thank you very much! Can someone give me the command for this? Hello, Since the last Windows 10 update, I have not been able to use my laptop because it is always trapped in this loop: Preparing Automatic Repair … Diagnosing your PC!

None of the options in the Advanced Options worked. I tried to repair or reinstall Windows 10 from a USB, but it was not successful! I want to know if I can resolve my issue by following the procedure taught on this web page, i. Thank you very much in advance for your time and consideration. I haved correctly perform all the steps until the bcdedit comprobation. You still get this message right? The boot configuration data store could not be found.

You are the MAN!!! Thanks a million brother! Hi, Whoever wrote this post i am thanking them very much. I have mistankly remove the main bootrecord.

Good, clear, line by line explanation… It really worked as described and saved a lot of time to reinstall the Windows and all the apps… Thanks a lot….

Am I screwed? You helped me make Windows 10 bootable again. Thank you very much for this detailed and easy to follow guide! All my files are there aswell. On internet there are many recommendations, which made the situation worse and worse. Thank you very much for very and only professional advise. Best regards! Did you put the Ubuntu live usb again or just without it?

I was able to recover windows 10 on my Dell Inspiron 15 after the windows boot manager had gone missing during arch linux dual boot installation. Then did the steps mentioned. Would you please help me with this issue? Could you have some minutes to talk on Whatsapp or messenger so we can fix it together…? My arch install required me to load vmd module at boot to work with RAID. Alhamdulillah WL. Thanks for the tips and guide. I am grateful to have found this valuable way so that it became the savior of my life.

Once again, thanks for the tips and guidance. Good luck for the future. Terima Kasih Atas tips dan panduan nya.

Berkat Cara ini, saya akhirnya tidak jadi install ulang windows 10 di komputer desktop saya. Saya bersyukur bisa menemukan cara berharga ini sehingga menjadi penyelamat hidup saya. Sekali lagi, terima kasih atas tips dan panduan nya.

Sukses selalu. Any hint please for this error: 0xc system registry file is missing or contains errors? I see the file is not missing, but somehow the system is not able to boot. How can I verify registry file integrity? However, I had now idea that the instructions, utility software, troubleshooting tips, etc.

Meanwhile, my stress level was maxed out knowing that if I accidentally pooched my spinning HDD without successfully getting the new SSD up and running that I would be faced with many, many more wasted hours reinstalling and rebuilding. I have been struggling for more than a month to get dual boot of Windows 10 two installations.

This solved it for me in half an hour. Thanks a bunch. This was a lifesaver! People like you who take the time to illustrate these concepts step by step are the unsung heroes of the Internet. This method worked for me today. At first you selected volume 1 FAT32 and assigned letter k to it than followed with several commands. At the end you were aiming to see the result on Volume 2 not volume 1 which I thought that we are trying establish boot on the Volume 1 not Volume 2 which is System reserved.

Also the volume d in the following command is supposed to be volume which you have installed windows. How did you resolve this? You just saved my life! Tried multiple other guides and nothing worked. Yours worked first time. Worked like a charm. I have a dual boot Ubuntu I wanted to make sure to thank you for this post as you allowed me to recover my broken Windows 10 installation.

Thanks to the experts who figured this out and took the time to document it to help everyone else. A couple of questions remain. However, it seems to work so I am alive again!

There were not steps to undo that. Is that needed? Will it prevent me from using drive K in the future? WOW, this totally saved me. This article however gets into the true details on what to do! Massive thanks! So thank you! I seem to be confused though. This is what I have:. I barely know how to operate command prompt. Notify me of followup comments via e-mail.

You can also subscribe without commenting. Leave this field empty. Home About. June 14, Windows 10 Windows 11 Windows Server Follow the instructions on the link. You can run the Command Prompt even if you only have a Windows installation media at hand. At this stage, it is very important to determine the type of partition table on the disk on which your Windows is installed: MBR or GPT.

Undo all changes. Related Reading. September 9, Mick November 9, – pm Thanks. It helped me well! Eras November 28, – pm Thank you for the quick reply! Kino July 23, – pm I got that error too at first. Chris December 7, – pm Please disregard my previus comment. Matt October 4, – pm Thank you Chris.

Same problem here. Michel January 14, – pm For a moment I thought I would never be able to bring my laptop back to life again, but this page helped me to fix the problem. Felipe January 25, – pm Hey guy.. Thanks a lot.. Daniel February 20, – am Hello, I followed your guide and seems like it would work great but I have a slight issue.

Max February 20, – pm Repair bootloader this way and then delete Windows 7 boot entry with msconfig utility fron win 8. Daniel February 28, – am How would i repair the boot without having the FAT32 reserve file on any of my harddrives? Daniel February 28, – am I skipped the steps with the FAT 32 and got all the way until renaming BCD I fixed it and was successful but when I went to rename it access got denied.

Skip this step and move to the next, where you recreate BCD config. Michael March 21, – pm Thank you very much. Works perfect. Made my day. Vikram March 24, – am Thanks for the detailed guide. Do Xuan Thao May 5, – am Thanks you very much! Allan Valdivia July 15, – am Thank you very much for your help! XeON January 14, – pm I have the same problem. Ruud from the Nethetrlands August 11, – pm This is great!!!! AlexSG August 16, – pm Thank you! Thankyou very much!! Cal October 6, – pm Tx dude.

This worked perfectly. Erik October 21, – am Thanks! Wolfgang December 1, – pm Thanks a lot!!! Very useful information. Worked perfect for my OS Win8. Nick S. December 23, – am Thanks a lot. Joseph A. December 28, – pm is it same with error code: 0xccv? Stephen Osterday February 10, – pm Mine went fine until I got to the bcdboot command. AL March 4, – am Hi Max, doe. Steven April 4, – pm I have read many similar articles on how to fix Windows boot problem in order to get mine working again.

Kiran May 20, – am A big thanks to you.. Ignacio May 28, – am Thanks mate!! Incognite June 11, – am Thanks! Nothing worked and your solution did work, even for Windows 10! Jack June 15, – pm Thanks for the helpful article. The error I encountered is: This volume does not contain a recognized file system.

How to deal with that? Jack June 16, – am Thanksss. Ahmed Hani March 19, – am Hello Jack, Could you please let us know how did you manage the raw partition as I have a similar problem? Kino July 23, – pm This works! Jane F December 18, – am This worked for me.

Thank you so many times! Anthony sessions September 22, – am Same problem. Luke October 11, – am Thanks a lot!! Weeks of work saved from reinstall!!! Dio canaglia! T October 20, – pm Used this solution after removing Ubuntu. The only solution that worked. Papa bless. Loodusemees November 1, – pm Thanks a lot! You really made my day! Advice worked well with my Windows Thanks a lot!!

Robert December 18, – pm Thanks for your help. Stephan February 12, – pm Thanks a lot for the excellent description — it worked fine on my Windows Muchas gracias.

Caio Foreman March 14, – pm did everything, now I boot into another error. Gene Edwards March 2, – am Great article!!! I was doing a Recovery when my laptop shut down, I forgot to plug the charger back in. Frankd3 March 8, – pm Im on day 4 right now I just bought a 2tb HD to xcopy all my data from my c: drive incase I screw my computer up further.

Pepe Gotera March 24, – pm Thank you very much, this save my life …. Roger Vince March 30, – pm Thank you very much. Roger Vince April 25, – am Correction to my comment on March 30th.

Thank you soooooo much!!!! This guide showed me how and I got the system back up and working Windows Robert Befort June 22, – pm I have a windows 10 which will not bootup probably due to misconfigured bootloader.

Berat August 9, – pm In my case when i type list disk command it just shows two disks. JW December 31, – pm Finally! Kunal June 1, – pm Thanks for this article. Sjjs June 11, – pm Thx a lot this worked. Marty January 19, – am After visiting and trying many suggestions on multiple websites, blah, blah..

James August 28, – pm Yeah, go to a better website than this one would be a good choice. Adam March 4, – am I cannot thank you enough! Harendra Rathore April 26, – pm Now this is the one i am looking for.


Leave a Comment

Your email address will not be published. Required fields are marked *